Differences

This shows you the differences between two versions of the page.

--- software:sdr [2015/08/14 07:46] – fix links widi
+++ software:sdr [2016/09/08 10:27] (current) – [Linux] add link to inspectrum 9r
@@ Line 1: / Line 1: @@
-== SDR Software for using the badge
+= SDR Software for using the badge
-=== Recommended Installations List
+== overview
-Just a quick check list of installations recommended before camp. Detailed descriptions below!
-Don't worry if you are not coming with a laptop, the badge will still be useful to you.
-==== Linux
+=== GNU Radio (Linux/Mac/Windows)
-* [[:software:sdr#gnu_radio_linux_mac_windows]|GNU Radio]]
-* [[:software:sdr#gqrx_sdr_linx_mac]|Gqrx SDR]]
+It's highly recommended to build [[http://gnuradio.org/|GNU Radio]] from source to use the most up-to-date version:
-* [[http://www.baudline.com|Baudline]] (not in the Debian package repository)
+[[http://gnuradio.org/redmine/projects/gnuradio/wiki/InstallingGRFromSource|Installation]]
+There were two GNU Radio workshops at Easterhegg 2015:
+* [[http://media.ccc.de/browse/conferences/eh2015/eh15_-_27_-__-_tagungsraum_1_-_201504041830_-_sdr_for_noobs_-_sec.html#video|SDR for Noobs]]
+* [[http://media.ccc.de/browse/conferences/eh2015/eh15_-_28_-__-_tagungsraum_1_-_201504051830_-_sdr_for_non-noobs_-_sec.html|SDR for non-noobs]]
+**gnuradio-companion** is the full-fledged signal processing application.
+**osmocom_fft** is a nice little graphical tool for quick signal checks.
+=== Gqrx SDR (Linux/Mac)
+[[http://gqrx.dk]]
+=== SDR# (Windows)
+[[http://sdrsharp.com/#sdrsharp]]
+=== RF Analyzer (Android)
+[[:software:sdr#Android]|instructions]]
+== installation details
+=== Linux
+* [[:software:sdr#gnu_radio_linux_mac_windows]|GNU Radio]] - Powerful suit for signal processing. Also contains 'gnuradio-companion', a GUI for designing the the processing blocks.
+* [[:software:sdr#gqrx_sdr_linx_mac]|Gqrx SDR]] - Easy display of signal strengths/waterfall etc. with basic filtering and demodulation support.
+* [[http://www.baudline.com|Baudline]] (not in the Debian package repository) - Another signal visualizer.
+* [[https://github.com/miek/inspectrum|inspectrum]] - Similar to baudline, but OSS.
+==== Debian based systems
+NOTE: Current versions of gqrx-sdr and gr-osmosdr in Ubuntu 14.04 are known to cause issues with the rad1o. (hackrf_info not detecting the badge, error loading libosmosdr etc.)
+The [[https://github.com/mossmann/hackrf/wiki/Installing-gnuradio-on-Ubuntu-14.04-with-the-packaging-manager|original hackrf wiki]] has a PPA with updated versions.
-* debian based systems
+. Install software:
     apt-get install hackrf gqrx-sdr gnuradio gr-osmosdr
-* archlinux
+. Make sure the hackrf kernel module is not loaded.
+If you don't do this, you'll get a -1000 error from hackrf_info
+<code>
+$ sudo rmmod hackrf
+$ sudo vim /etc/modprobe.d/blacklist.conf
+# module blacklisted for radi1o / gqrx usage
+blacklist hackrf
+</code>
-    pacman -S gqrx # pulls hackrf and gnuradio automatically in
-==== Windows
+. Additionally you will need some UDEV rules.
+Replace YOURUSER with your username (whoami)
+<code>
+$ sudo vim /etc/udev/rules.d/51-rad1o.rules
+SUBSYSTEM=="usb", ATTR{idVendor}=="1d50", ATTR{idProduct}=="cc15", MODE="0600", OWNER="YOURUSER", GROUP="YOURUSER"
+SUBSYSTEM=="usb", ATTR{idVendor}=="1d50", ATTR{idProduct}=="6089", MODE="0600", OWNER="YOURUSER", GROUP="YOURUSER"
+</code>
+. make sure you boot the hackrf-old on the rad1o, as gqrx somehow only recognized the device as a hackrf then (at least with gqrx from debian testing)
+. check with hackrf_info that everything works
+. launch gqrx, it should autoconfigure itself
+==== Archlinux
+    pacman -S gqrx python2 python2-lxml python2-cheetah # pulls hackrf and gnuradio automatically in
+==== Gentoo Linux
+Versions known to work:
+net-wireless/gnuradio-3.7.7.x
+net-wireless/gr-osmosdr-1.4_x
+net-wireless/gqrx-2.3.x
+Make sure the 'hackrf' useflag is enabled where available.
+If you have the 'hackrf' kernel module compiled, prevent it from loading by adding
+    blacklist hackrf
+to your /etc/modprobe.d/blacklist.conf. (update your modprobe config with 'depmod -a')
+==== Fedora
+. Install software:
+<code>
+$ sudo dnf install gnuradio gnuradio-doc gnuradio-examples gqrx hackrf hackrf-doc gr-osmosdr gr-air-modes
+</code>
+<note warning>Fedora 24 also needs hackrf-static.</note>
+. boot into **HKRF-OLD** on the rad1o (for now, hopefully soon in HACKRF mode)
+. check if it's detected with hackrf_info
+<code>
+$ hackrf_info
+Found HackRF board.
+Board ID Number: 3 (Unknown Board ID)
+Firmware Version: [...]
+Part ID Number: [...]
+Serial Number: [...]
+</code>
+. run gqrx, accepting the default of //hackrf unknown device//. [[http://gqrx.dk/supported-hardware#hackrf|Gqrx SDR Supported hardware]]
+<code>
+$ gqrx
+</code>
+. if you get results in gqrx, move on to osmocom_fft, keeping in mind that the built-in [[:antennas|antenna]] is tuned to 2.5GHz
+<code>
+$ osmocom_fft
+</code>
+. now you are sure the rad1o speaks to your Fedora box and you can move on to GNU Radio
+<code>
+$ gnuradio-companion
+</code>
+To use the rad1o, search for blocks with //osmocom// in the name in GNU Radio.
+You may want to check out the files in ''/usr/share/gnuradio/examples/''
+=== Windows
 * [[:software:sdr#gnu_radio_linux_mac_windows]|GNU Radio]]
 * [[:software:sdr#sdr_windows]|SDR#]]
+* [[http://sdr-radio.com/Software|SDR Console]]
+=== Mac
+Follow these instructions to install Gnuradio-Suite on your Mac:
+Prerequisites:
+* Install either [[http://brew.sh|HomeBrew]], MacPorts or Fink
+* Download and install XQuarz via http://xquartz.macosforge.org/landing/
+* Download and install MacPorts: https://www.macports.org/install.php
+Install GnuRadio with MacPorts:
+<code>
+sudo port install gnuradio
+</code>
+You also want to install the OsmoSDR radio blocks for GnuRadio
+<code>
+sudo port install gr-osmosdr
+</code>
+To install GnuRadio with HomeBrew, you can follow [[https://github.com/robotastic/homebrew-hackrf|this guide]].
+Start GnuRadio in the terminal with
+<code>
+gnuradio-companion
+</code>
-==== Mac
 * [[:software:sdr#gnu_radio_linux_mac_windows]|GNU Radio]]
 * [[:software:sdr#gqrx_sdr_linux_mac|Gqrx-SDR]]
-==== Android
+=== Android
 * [[:software:sdr#rf_analyzer_android]|RF Analyzer]]
@@ Line 32: / Line 163: @@
-=== RF Analyzer (Android)
+==== RF Analyzer (Android)
 Patched version with rad1o support:
-  * Binary APK: [[https://github.com/rad1o/RFAnalyzer/raw/rad1o/RFAnalyzer-rad1o.apk|RFAnalyzer-rad1o.apk]]
+  * Binary APK: [[https://github.com/rad1o/RFAnalyzer/raw/rad1o/RFAnalyzer-rad1o.apk|RFAnalyzer-rad1o.apk]] (as of 2015-08-23, this APK seem to need HKRF-OLD mode)
   * Source: [[https://github.com/rad1o/RFAnalyzer|RFAnalyzer]]
 Requires an OTG cable or adapter and an OTG capable mobile (e.g. Jolla and Nexus 4 are **//not//**)
-=== GNU Radio (Linux/Mac/Windows)
-It's highly recommended to build [[http://gnuradio.org/|GNU Radio]] from source to use the most up-to-date version:
-[[http://gnuradio.org/redmine/projects/gnuradio/wiki/InstallingGRFromSource|Installation]]
-There were two GNU Radio workshops at Easterhegg 2015:
-[[http://media.ccc.de/browse/conferences/eh2015/eh15_-_27_-__-_tagungsraum_1_-_201504041830_-_sdr_for_noobs_-_sec.html#video|SDR for Noobs]]
-[[http://media.ccc.de/browse/conferences/eh2015/eh15_-_28_-__-_tagungsraum_1_-_201504051830_-_sdr_for_non-noobs_-_sec.html|SDR for non-noobs]]
-**gnuradio-companion** is the full-fledged signal processing application.
-**osmocom_fft** is a nice little graphical tool for quick signal checks.
-=== Gqrx SDR (Linux/Mac)
-[[http://gqrx.dk]]
-=== SDR# (Windows)
-http://sdrsharp.com/#sdrsharp