This is an old revision of the document!
This howto explains how to update the firmware running on your rad1o.
The rad1o firmware consists of these main parts:
See firmware:releases for the most recent version and a release history.
UP
while you turn on the rad1o. it will now boot in MSC
mode, appearing as a mass storage device (like a USB stick) to the computercd /mnt/FE49-AB84
tar -xzvf ~/Downloads/rad1o-revXX.tgz sync
(The paths will probably be different on your system)
Your rad1o should now run the most recently released firmware. You can check the release version of your firmware in the “INFO” menu.