Differences

This shows you the differences between two versions of the page.

--- case [2015/07/14 07:49] – mkie
+++ case [2015/08/19 12:47] (current) – iggy
@@ Line 1: / Line 1: @@
-= CAD Data for a rad1o case
+see [[extension:lasercase|Laser Cut Enclosure]]
-If you want to build your own case for the rad1o, we added DXF files to github.
-rad1o_dimension.dxf is just the PCB outline with holes.
-https://github.com/rad1o/hardware/blob/master/rad1o_dimension.dxf
-rad1o_with_parts.dxf is PCB, display, joystick and factory mounted connectors.
-https://github.com/rad1o/hardware/blob/master/rad1o_with_parts.dxf
-You can also easily make your own dxf files using Eagle, just activate your desired layers and run the dxf.ulp
-== Height of the case
-There were some questions about the height, normally there are no parts on the backside, only if you need JTAG connections or a few CPLD extension lines connects here. If you solder the SMA connectors, you need about 1,5 mm here.
-If you will place the battery on the back, you need about 5 mm here and some space for the cable on the left. On the front you need a minimum height of 5 mm for the audio connector and a hole for display and joystick.
-Hint: The pictures currently show the first prototype - the current Github contains the correct data for the camp edition.
-Happy building or knitting!