This is an old revision of the document!
If you want to build your own case for the rad1o, we added DXF files to github.
rad1o_dimension.dxf is just the PCB outline with holes.
rad1o_with_parts.dxf is PCB, display, joystick and factory mounted connectors.
You can also easily make your own dxf files using Eagle, just activate your desired layers and run the dxf.ulp
There were some questions about the height, normally there are no parts on the backside, only if you need JTAG connections or a few CPLD extension lines connects here. If you solder the SMA connectors, you need about 1,5 mm here.
If you will place the battery on the back, you need about 5 mm here and some space for the cable on the left. On the front you need a minimum height of 5 mm for the audio connector and a hole for display and joystick.
Hint: The pictures currently show the first prototype - the current Github contains the correct data for the camp edition.
Happy building or knitting!