Differences

This shows you the differences between two versions of the page.

--- troubleshooting [2016/01/02 19:52]
dos [rad1o usb disconnects every 5 seconds / not usable at all] add rad1o USB PID aside of HackRF one
+++ troubleshooting [2016/12/27 00:26]
151.217.239.253 [I've connected the rad1o in Mass Storage Mode, but the filesystem is read only]
@@ Line 45: / Line 45: @@
 - run fsck on that partition
-  fschk.vfat -v /dev/sdb
+  fsck.vfat -v /dev/sdb
 - follow the instructions of fsck
@@ Line 140: / Line 140: @@
 ===== display blinks if turned on, but quickly turns off afterwards. All fine on USB power =====
-Your battery is empty. The voltage might be even too low to be recharged.
+Your battery is empty.
-Try to kickstart the loading process by connecting the read and black cables of the battery to a 3.7V source for about a minute.
-Or if you have professional LiPo-charger complaining about voltage being too low, try NiMh mode, until you reach about 3.4V. Then continue loading normally or via a USB.
-BE CAREFUL and ask an experienced friend to help you.
 ===== on/off switch is not working  anymore =====

rad1o