rad1o

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
= Software

== SDR Software for using the badge

=== Recommended Installations List
Just a quick check list of installations recommended before camp. Detailed descriptions below!
Don't worry if you are not coming with a laptop, the badge will still be useful to you.

==== Linux
* [[:software#gnu_radio_linux_mac_windows]|GNU Radio]]
* [[:software#gqrx_sdr_linx_mac]|Gqrx SDR]]

* debian based systems

    apt-get install hackrf gqrx-sdr gnuradio

* archlinux

    pacman -S gqrx # pulls hackrf and gnuradio automatically in

==== Windows
* [[:software#gnu_radio_linux_mac_windows]|GNU Radio]]
* [[:software#sdr_windows]|SDR#]]

==== Mac
* [[:software#gnu_radio_linux_mac_windows]|GNU Radio]]
* [[:software#gqrx_sdr_linux_mac|Gqrx-SDR]]

==== Android
* [[:software#rf_analyzer_android]|RF Analyzer]]


=== RF Analyzer (Android)

* available via the F-Droid Store or [[https://github.com/demantz/RFAnalyzer|GitHub]]
* requires an OTG cable or adapter and an OTG capable mobile (e.g. Jolla and Nexus 4 are **//not//**)

=== GNU Radio (Linux/Mac/Windows)

It's highly recommended to build [[http://gnuradio.org/|GNU Radio]] from source to use the most up-to-date version:
[[http://gnuradio.org/redmine/projects/gnuradio/wiki/InstallingGRFromSource|Installation]]

There were two GNU Radio workshops at Easterhegg 2015:
[[http://media.ccc.de/browse/conferences/eh2015/eh15_-_27_-__-_tagungsraum_1_-_201504041830_-_sdr_for_noobs_-_sec.html#video|SDR for Noobs]]
[[http://media.ccc.de/browse/conferences/eh2015/eh15_-_28_-__-_tagungsraum_1_-_201504051830_-_sdr_for_non-noobs_-_sec.html|SDR for non-noobs]]

**gnuradio-companion** is the full-fledged signal processing application.

**osmocom_fft** is a nice little graphical tool for quick signal checks. 
=== Gqrx SDR (Linux/Mac)

[[http://gqrx.dk]]

=== SDR# (Windows)
http://sdrsharp.com/#sdrsharp


== Firmware (already flashed to the badge)
You can find the whole software in our git repository on github: https://github.com/rad1o/f1rmware

Please read the [[https://github.com/rad1o/f1rmware/blob/master/doc/build.md|build instructions]] there. It's also a good starting point to find out how to write your own firmware/software for the rad1o.

The code is released under GPLv2/BSD license (we use GPL libraries, but our code will be dual licensed)

Please have a look at the [[:hardware]] page for data sheets of the components.

=== Structure

The base firmware provides you with a set of functions to control the rad1o

  * How to build your own software
  * There will be a patched HackRF Firmware, to use your rad1o with a standard HackRF setup.
rad1o

User Tools

Site Tools

Page Tools
