User Tools

Site Tools


parts

This is an old revision of the document!


Parts and extension kits

There will be a few connectors, LED and RF kits, and also micro USB cables available at the camp site.

Ordering closed on August 5 18:00 UTC For planning the amount of kits to bring, it will be very helpful to send an e-mail to rad1o_parts@apollo-11.de and state what you like. We just count your orders there. For questions use IRC and/or team e-mail.

We are not an online shop, we just try our best to help you. We hold your order until day 2 of the camp. We cannot guarantee that you will get your parts when you come on day 3 or 4. When we run out of parts, they're gone! Prices may vary because distributors can change prices or availability of parts.

Something else: Many people ask about antenna building and parts. Yes, we will have a networkanalyzer and spectrumanalyzer (up to 8 GHz) at the camp and there will be a workshop too (maybe day 3 or 4).

If you just need connectors or cables, we have a professional crimping tool (no chinese 20 Euro model) at the camp. We order lots of stuff, so if you need a 20 m cable or a bunch of SMA connectors, write an e-mail to the address above.

If possible, try to get the parts you will need in advance - especially the micro USB cable!

Connector Kit

sold out

Contains all I/O connectors, just standard 2,54 mm one or two row Pinheader, availble in any electronic parts store. price around 1-2 Euro

  • 2×10, 2×11 and 2×13 pins Pinheader, e.g. Reichelt SL 2X10G 2,54 and SL 2X13G 2,54 (Reichelt has no 2×11 pin headers, you can take the 2×13 and cut it off)

If you need (Not in Kit):

  • JTAG is 2×5 Pinheader, on backside under display (Reichelt MPE 087-2-010)
  • ISP is 1×6 Pinheader, on backside under display (Reichelt MPE 087-1-006)
  • X1 is 2×10 SMD Pinheader, on backside under headphone (Reichelt SL 2x10G SMD2,54)

Antenna Builder Kit

sold out

  • An SMA Crimp Connector (e.g. Reichelt SMA ST G)
  • 2 m RG174 cable (like Reichelt RG 174-5 which is 5m long)
  • price around 5-8 Euro
  • optional part:
    • 3d printed d1pole center part: d1pole

SMA Connector

  • Just a single SMA female PCB connector (e.g. Reichelt R125 426)
  • price around 5,- Euro

RF Kit

There will be another 250 RF Kits available on Day 3.

Two SMA female PCB connectors and the Laird RF shieldings (version with separate frame that's soldered onto the PCB and metal cover that can be clipped onto the frame), price will be around 20,- Euro

Following 1.7 mm Edge SMA connectors are compatible (There may be others that also fit):

ManufactorPart no.Farnell Order No.RS-Components Order No.Digikey Order No.
Multicomp 19-70-1-TGG 1342652- -
Johannsen 142-0701-8511019325- J658-ND
Amphenol 132255 21445272509270882ACX1424-ND
Molex 73251-1150 1909295759-5299 WM5534-ND

The Laird Shields (RF shieldings)

ManufactorPart no.Farnell Order No.RS-Components Order No.Digikey Order No.
LAIRD BMI-S-206-F- - 903-1055-2-ND
LAIRD BMI-S-206-C- - 903-1018-ND
LAIRD BMI-S-202-F- - 903-1051-2-ND
LAIRD BMI-S-202-C- - 903-1014-ND

LED Kit

nearly sold out

The eight WS2812b RGB LEDs and three 0 Ohm Resistors

Get them here by yourself: https://www.adafruit.com/products/1655?PageSpeed=noscript

Or here (from Germany): http://www.watterott.com/de/WS2812B-Intelligent-RGB-LED-10-Stk

Kits will be around 5,- Euro

USB

Micro USB cable

Get it anywhere, but never buy at Mediamarkt, Saturn or other expensive stores.

We will a few cables at the camp, price around 2-3 Euro

Laser Cut Enclosure

The case is currently sold out, it will be back on stock on Day 3.

andz and chris007 provide a limited amount of the “Simple laser-cut case” at the MuCCC Village. It is a complete kit, including screws and spacers.
Available shortly after badge release, Price per Kit: 10,- Euro

parts.1439527240.txt.gz · Last modified: 2015/08/14 06:40 by mh