User Tools

Site Tools


parts

This is an old revision of the document!


Parts and extension kits

There will be a few connectors, LED and RF kits, and also micro USB cables available at the camp site.

Ordering closed on August 5 18:00 UTC For planning the amount of kits to bring, it will be very helpful to send an e-mail to rad1o_parts@apollo-11.de and state what you like. We just count your orders there. For questions use IRC and/or team e-mail.

We are not an online shop, we just try our best to help you. We hold your order until day 2 of the camp. We cannot guarantee that you will get your parts when you come on day 3 or 4. When we run out of parts, they're gone! Prices may vary because distributors can change prices or availability of parts.

Something else: Many peple ask about antenna building and parts. Yes, we will have a networkanalyzer and spectrumanalyser (up to 8 GHz) at the camp and there will be a workshop too.

If you just need connectors or cables, we have a professional crimping tool (no chinese 20 Euro model) at the camp. We order lots of stuff, so if you need a 20 m cable or a bunch of SMA connectors, write an e-mail to the address above.

If possible, try to get the parts you will need in advance - especially the micro USB cable!)

Connector Kit

Contains all I/O connectors, just standard 2,54 mm one or two row Pinheader, availble in any electronic parts store. price around 1-2 Euro

  • 2×10, 2×11 and 2×13 pins Pinheader, e.g. Reichelt SL 2X10G 2,54 and SL 2X13G 2,54 (Reichelt has no 2×11 pin headers, you can take the 2×13 and cut it off)

If you need (Not in Kit):

  • JTAG is 2×5 Pinheader, on backside under display (Reichelt MPE 087-2-010)
  • ISP is 1×6 Pinheader, on backside under display (Reichelt MPE 087-1-006)
  • X1 is 2×10 SMD Pinheader, on backside under headphone (Reichelt SL 2x10G SMD2,54)

Antenna Builder Kit

  • An SMA Crimp Connector (e.g. Reichelt SMA ST G)
  • 2 m RG174 cable (like Reichelt RG 174-5 which is 5m long)
  • price around 5-8 Euro
  • optional part:
    • 3d printed d1pole center part: d1pole

SMA Connector

  • Just a single SMA female PCB connector (e.g. Reichelt R125 426)
  • price around 5,- Euro

RF Kit

Two SMA female PCB connectors and the Laird RF shields (the Version with frame and seperate shild), price will be around 20,- Euro

Following 1.7 mm Edge SMA connectors are compatible (There may be others, thats also fit):

ManufactorPart no.Farnell Order No.RS-Components Order No.Digikey Order No.
Multicomp 19-70-1-TGG 1342652- -
Johannsen 142-0701-8511019325- J658-ND
Amphenol 132255 21445272509270882ACX1424-ND
Molex 73251-1150 1909295759-5299 WM5534-ND

The Laird Shilds

ManufactorPart no.Farnell Order No.RS-Components Order No.Digikey Order No.
LAIRD BMI-S-206-F- - 903-1055-2-ND
LAIRD BMI-S-206-C- - 903-1018-ND
LAIRD BMI-S-202-F- - 903-1051-2-ND
LAIRD BMI-S-202-C- - 903-1014-ND

LED Kit

The eight WS2812b RGB LEDs and three 0 Ohm Resistors

Get them here by yourself: https://www.adafruit.com/products/1655?PageSpeed=noscript

Or here (from Germany): http://www.watterott.com/de/WS2812B-Intelligent-RGB-LED-10-Stk

Kits will be around 5,- Euro

USB

Micro USB cable

Get it anywhere, but never buy at Mediamarkt, Saturn or other expensive stores.

We will a few cables at the camp, price around 2-3 Euro

parts.1438909253.txt.gz · Last modified: 2015/08/07 03:00 by b4um