rad1o

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
= Parts and extension kits

There will be a **//few//** connectors, LED and RF kits, and also micro USB cables available at the camp site. 

**//Ordering closed on August 5 18:00 UTC//** <del>For planning the amount of kits to bring, it will be very helpful to send an e-mail to **//rad1o_parts@apollo-11.de//** and state what you like. We just count your orders there. For questions use [[contact|IRC and/or team e-mail]].</del>

We are not an online shop, we just try our best to help you. We hold your order until day 2 of the camp. We cannot guarantee that you will get your parts when you come on day 3 or 4. When we run out of parts, they're gone! Prices may vary because distributors can change prices or availability of parts.

Something else: Many people ask about antenna building and parts. Yes, we will have a networkanalyzer and spectrumanalyzer (up to 8 GHz) at the camp and there will be a workshop too (maybe day 3 or 4).

If you just need connectors or cables, we have a professional crimping tool (no chinese 20 Euro model) at the camp. <del>We order lots of stuff, so if you need a 20 m cable or a bunch of SMA connectors, write an e-mail to the address above.</del>

**If possible, try to get the parts you will need in advance - especially the micro USB cable!**
== Connector Kit

**sold out**

Contains all I/O connectors, just standard 2,54 mm one or two row Pinheader, availble in any electronic parts store. price around **//1-2 Euro//**

  * 2x10, 2x11 and 2x13 pins Pinheader, e.g. Reichelt SL 2X10G 2,54 and SL 2X13G 2,54 (Reichelt has no 2x11 pin headers, you can take the 2x13 and cut it off)

If you need (Not in Kit):

  * JTAG is 2x5 Pinheader, on backside under display (Reichelt MPE 087-2-010)
  * ISP is 1x6 Pinheader, on backside under display (Reichelt MPE 087-1-006)
  * X1 is 2x10 SMD Pinheader, on backside under headphone (Reichelt SL 2x10G SMD2,54)




== Antenna Builder Kit

**sold out**

  * An SMA Crimp Connector (e.g. Reichelt [[http://www.reichelt.de/SMA-Steckverbinder/SMA-ST-G/3/index.html?ACTION=3&GROUPID=3198&ARTICLE=18175&SEARCH=SMA%20ST%20G&OFFSET=16&WKID=0&|SMA ST G]])
  * 2 m RG174 cable (like Reichelt [[http://www.reichelt.de/HF-Leitung-RG58-etc-/RG-174-5/3/index.html?ACTION=3&GROUPID=3327&ARTICLE=25244&SEARCH=RG%20174&OFFSET=16&WKID=0&|RG 174-5]] which is 5m long)
  * price around **//5-8 Euro//**
  * optional part:
      * 3d printed **d1pole** center part: [[https://www.dk0tu.de/users/DB4UM/c3d1pole/|d1pole]]


== SMA Connector

  * Just a single SMA female PCB connector (e.g. Reichelt [[http://www.reichelt.de/SMA-Steckverbinder/R125-426/3/index.html?ACTION=3&GROUPID=3198&ARTICLE=120890&SEARCH=R125%20426&OFFSET=16&WKID=0&|R125 426]])
  * price around **//5,- Euro//**


== RF Kit

**There will be another 250 RF Kits available on Day 3.**

Two SMA female PCB connectors and the Laird RF shieldings (version with separate frame that's soldered onto the PCB and metal cover that can be clipped onto the frame), price will be around **//20,- Euro//**

Following 1.7 mm Edge SMA connectors are compatible (There may be others that also fit):

^Manufactor^Part no.^Farnell Order No.^RS-Components Order No.^Digikey Order No.^
|Multicomp |19-70-1-TGG |1342652|-         |-         |
|Johannsen |142-0701-851|1019325|-  	   |J658-ND   |
|Amphenol  |132255      |2144527|2509270882|ACX1424-ND|
|Molex     |73251-1150  |1909295|759-5299  |WM5534-ND |

The Laird Shields (RF shieldings)

^Manufactor^Part no.^Farnell Order No.^RS-Components Order No.^Digikey Order No.^
|LAIRD     |BMI-S-206-F|-    |-            |903-1055-2-ND|
|LAIRD     |BMI-S-206-C|-    |-  	   |903-1018-ND  |
|LAIRD     |BMI-S-202-F|-    |-            |903-1051-2-ND|
|LAIRD     |BMI-S-202-C|-    |-  	   |903-1014-ND |

== LED Kit

**nearly sold out**

The eight WS2812b RGB LEDs and three 0 Ohm Resistors

Get them here by yourself: https://www.adafruit.com/products/1655?PageSpeed=noscript

Or here (from Germany): http://www.watterott.com/de/WS2812B-Intelligent-RGB-LED-10-Stk

Kits will be around **//5,- Euro//** \\ 



== USB

Micro USB cable

Get it anywhere, but never buy at Mediamarkt, Saturn or other expensive stores.

We will //a few// cables at the camp, price around **//2-3 Euro//**

== Laser Cut Enclosure

**The case is completely sold out, please visit a Fablab on the camp and lasercut it.**

**andz** and **chris007** provide a limited amount of the "Simple laser-cut case" at the MuCCC Village. It is a complete kit, including screws and spacers. \\
Available shortly after badge release, Price per Kit: **//10,- Euro//** \\


{{:cases:simple_laser_cut_top.jpg?200 |}}

{{:cases:simple_laser_cut_bottom.jpg?200 |}}
rad1o

User Tools

Site Tools

Page Tools
