User Tools

Site Tools


issues

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
issues [2015/12/31 20:32]
liooo [Known Issues Version 2015-06-23 (What you get on CCCamp)]
issues [2015/12/31 20:36]
liooo [Solutions]
Line 17: Line 17:
 My display did also not show text. Sometimes other troubles as well and rad1o not really useable. Enabling VDD on RF (all the time) solved it temporarily. TX was too low and I found a bridge between VDD and RF1 below IC402. Resoldering it solved my issue. There should be no DC on the RF lines. Check DC voltages around the RF switches. My display did also not show text. Sometimes other troubles as well and rad1o not really useable. Enabling VDD on RF (all the time) solved it temporarily. TX was too low and I found a bridge between VDD and RF1 below IC402. Resoldering it solved my issue. There should be no DC on the RF lines. Check DC voltages around the RF switches.
  
-== Missing high pass filter +== Missing high-pass filter 
-There is no high pass populateted ​(FL301) because of the cost. You can't transmit or receive above 2.75 GHz without modifications. ​+There is no high-pass filter populated ​(FL301) because of the cost. You can't transmit or receive above 2.75 GHz without modifications. ​
 === Solutions === Solutions
-  * Populate the high pass +  * Populate the high pass (for part number see schematic) 
-  * Bridge the high pass and add an external filter\\+  * Bridge the high-pass and add an external filter\\
 For RX, a bridge on the high pass should be OK\\ For RX, a bridge on the high pass should be OK\\
 {{:​missing_high_pass_fl301.png?​200|}} {{:​missing_high_pass_fl301.png?​200|}}
issues.txt · Last modified: 2015/12/31 20:36 by liooo