User Tools

Site Tools


howto:update

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
howto:update [2015/08/14 09:31]
151.217.66.45 [Requirements]
howto:update [2015/10/14 15:26] (current)
markusbec [Flash Firmware for recovery]
Line 1: Line 1:
 ====== How to update the firmware ====== ====== How to update the firmware ======
  
-This howto explains how to update the firmware running on your rad1o.+This howto explains how to update the firmware running on your rad1o from a binary release.
  
 The rad1o firmware consists of these main parts: The rad1o firmware consists of these main parts:
Line 8: Line 8:
   * Applications (camp, hackrf, testapp, …)   * Applications (camp, hackrf, testapp, …)
   * l0dables (snake, schedule, …)   * l0dables (snake, schedule, …)
-  * Other files (configuration ​files, fonts, graphics)+  * Other files (configuration,​ fonts, graphics)
  
 See [[firmware:​releases|firmware:​releases]] for the most recent version and a release history. See [[firmware:​releases|firmware:​releases]] for the most recent version and a release history.
  
-<note tip>​During campthere is an update station located at the muCCC village. Bring your rad1o and update it there.</​note>​+Alternativelyyou can [[howto:​build|build ​the firmware yourself]] ​and flash the latest version from git
  
 ===== Requirements ===== ===== Requirements =====
Line 24: Line 24:
  
   * turn off the rad1o   * turn off the rad1o
-  * connect the rad1o with the USB cable to the computer +  * connect the rad1o (rad1o port A) with a micro-USB cable to the computer 
-  * push and hold ''​UP''​ while you turn on the rad1o. it will now boot in ''​MSC''​ mode, appearing as a mass storage device (like a USB stick) to the computer+  * push and hold the joystick ​''​UP''​ while you turn on the rad1o. it will now boot in ''​MSC''​ mode, appearing as a mass storage device (like a USB stick) to the computer
   * [[firmware:​releases|Download the latest firmware file]]   * [[firmware:​releases|Download the latest firmware file]]
   * unpack it and copy all the contained files to the mounted device, overwriting the existing files   * unpack it and copy all the contained files to the mounted device, overwriting the existing files
Line 33: Line 33:
   sync   sync
  
-(The paths will probably be different on your system)+(The paths will probably be different on your system; For example, the mount point in Debian/​Ubuntu/​Mint may be in /​media/​[username]/​[device name; e.g. 0FC0-CABC])
  
 (The tar has the firmware files in a subdir, hence the ''​--strip 1''​ [at least rad1o-rev02.tgz does]; the new firmware files must go to the root of rad1o'​s file system, or the upgrade won't work.) (The tar has the firmware files in a subdir, hence the ''​--strip 1''​ [at least rad1o-rev02.tgz does]; the new firmware files must go to the root of rad1o'​s file system, or the upgrade won't work.)
Line 45: Line 45:
  
 Your rad1o should now run the most recently released firmware. You can check the release version of your firmware in the "​INFO"​ menu. Your rad1o should now run the most recently released firmware. You can check the release version of your firmware in the "​INFO"​ menu.
 +
 +=====  Flash Firmware for recovery =====
 +
 +Checkout Git F1rmware Repo
 +
 +cd /​f1rmware/​smartflash/​
 +
 +Get all components:
 +  make gather ​
 +
 +Make MSC Update
 +  make UDISK=sdX msc 
 +
 +or Make Full Update
 +  make UPATH=sdX flash
 +
 +
howto/update.1439537464.txt.gz · Last modified: 2015/08/14 09:31 by 151.217.66.45