rad1o

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== How to update the firmware ======

This howto explains how to update the firmware running on your rad1o.

The rad1o firmware consists of these main parts:

  * The bootloader
  * Applications (camp, hackrf, testapp, …)
  * l0dables (snake, schedule, …)
  * Other files (configuration files, fonts, graphics)

See [[firmware:releases|firmware:releases]] for the most recent version and a release history.

<note tip>During camp, there is an update station located at the muCCC village. Bring your rad1o and update it there.</note>

===== Requirements =====

  * A rad1o
  * A computer with a USB-Port
  * A micro USB cable
  * A firmware file

===== Tasks =====

  * turn off the rad1o
  * connect the rad1o with the USB cable to the computer
  * push and hold ''UP'' while you turn on the rad1o. it will now boot in ''MSC'' mode, appearing as a mass storage device (like a USB stick) to the computer
  * unpack the firmware file and copy all the contained files to the mounted device and overwrite the existing files
  
  cd /mnt/FE49-AB84
  tar -xzvf ~/Downloads/rad1o-revXX.tgz
  sync

(The paths will probably be different on your system)
  * wait until the left bottom LED stops flashing
  * unmount the device
  * turn your rad1o off and on again

===== Result =====

Your rad1o should now run the most recently released firmware. You can check the release version of your firmware in the "INFO" menu.

rad1o

User Tools

Site Tools

Page Tools