Differences

This shows you the differences between two versions of the page.

--- howto:update [2015/08/13 16:21] – [How to update the firmware] mkie
+++ howto:update [2022/10/26 20:06] (current) – schneider
@@ Line 1: / Line 1: @@
 ====== How to update the firmware ======
-This howto explains how to update the firmware running on your rad1o.
+This howto explains how to update the firmware running on your rad1o from a binary release.
 The rad1o firmware consists of these main parts:
@@ Line 8: / Line 8: @@
   * Applications (camp, hackrf, testapp, …)
   * l0dables (snake, schedule, …)
-  * Other files (configuration files, fonts, graphics)
+  * Other files (configuration, fonts, graphics)
 See [[firmware:releases|firmware:releases]] for the most recent version and a release history.
-<note tip>During camp, there is an update station located at the muCCC village. Bring your rad1o and update it there.</note>
+Alternatively, you can [[howto:build|build the firmware yourself]] and flash the latest version from git
 ===== Requirements =====
@@ Line 24: / Line 24: @@
   * turn off the rad1o
-  * connect the rad1o with the USB cable to the computer
+  * connect the rad1o (rad1o port A) with a micro-USB cable to the computer
-  * push and hold ''UP'' while you turn on the rad1o. it will now boot in ''MSC'' mode, appearing as a mass storage device (like a USB stick) to the computer
+  * push and hold the joystick ''UP'' while you turn on the rad1o. it will now boot in ''MSC'' mode, appearing as a mass storage device (like a USB stick) to the computer
-  * unpack the firmware file and copy all the contained files to the mounted device
+  * [[firmware:releases|Download the latest firmware file]]
+  * unpack it and copy all the contained files to the mounted device, overwriting the existing files
   cd /mnt/FE49-AB84
-  tar -xzvf ~/Downloads/rad1o-revXX.tgz
+  tar -xzv --strip 1 -f ~/Downloads/rad1o-revXX.tgz
+  sync
-(The paths will probably be different on your system)
+(The paths will probably be different on your system; For example, the mount point in Debian/Ubuntu/Mint may be in /media/[username]/[device name; e.g. 0FC0-CABC])
+(The tar has the firmware files in a subdir, hence the ''--strip 1'' [at least rad1o-rev02.tgz does]; the new firmware files must go to the root of rad1o's file system, or the upgrade won't work.)
+(OS X users: If you unpack and copy via the Finder a lot of resource fork files will be generated, so tar is preferred.)
+  * wait until the left bottom LED stops flashing
   * unmount the device
-  * turn your rad1o off and on again.
+  * turn your rad1o off and on again. (If your screen goes dark, try unplugging the USB or setting the chargeled config to 0.)
 ===== Result =====
-  * your rad1o should now run the most recently released firmware. You can check the release version of your firmware in the "INFO" menu.
+Your rad1o should now run the most recently released firmware. You can check the release version of your firmware in the "INFO" menu.
+=====  Flash Firmware for recovery =====
+Checkout Git F1rmware Repo
+cd /f1rmware/smartflash/
+Get all components:
+  make gather
+Make MSC Update
+  make UDISK=sdX msc
+or Make Full Update
+  make UPATH=sdX flash