User Tools

Site Tools


case

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
case [2015/08/12 08:48]
chris [Simple laser-cut case]
case [2015/08/19 14:47] (current)
iggy
Line 1: Line 1:
-= Limited case run on Camp +see [[extension:lasercase|Laser Cut Enclosure]]
- +
-**andz** and **chris007** provide a limited amount of the "​Simple laser-cut case" at the MuCCC Village. It is a complete kit, including screws and spacers. \\ +
-Available shortly after badge release, Price per Kit: 10,- Euro. +
- +
-**syso** will be only there at saturday and sunday, but he will be bringing (High-Resolution,​ pretty) Laser Cut Enclosures (different styles) to the Camp. If you want to get one, please send an e-mail to cccamp-rad1o-cases (at) ext.no-route.org +
- +
-Note: this is not an official rad1o enclosure. syso is just volunteering to provide them. +
- +
-= CAD Data for a rad1o case +
- +
-If you want to build your own case for the rad1o, we added DXF files to github. +
- +
-rad1o_dimension.dxf is just the PCB outline with holes. +
- +
-https://​github.com/​rad1o/​hardware/​blob/​master/​rad1o_dimension.dxf +
- +
-rad1o_with_parts.dxf is PCB, display, joystick and factory mounted connectors. +
- +
-https://​github.com/​rad1o/​hardware/​blob/​master/​rad1o_with_parts.dxf +
- +
-You can also easily make your own dxf files using Eagle, just activate your desired layers and run the dxf.ulp +
- +
-== Height of the case +
- +
-There were some questions about the height, normally there are no parts on the backside, only if you need JTAG connections or a few CPLD extension lines connects here. If you solder the SMA connectors, you need about 1,5 mm here. +
- +
-If you will place the battery on the back, you need about 5 mm here and some space for the cable on the left. On the front you need a minimum height of 5 mm for the audio connector and a hole for display and joystick.  +
- +
-Hint: The pictures currently show the first prototype - the current Github contains the correct data for the camp edition. +
- +
-Happy building or knitting! +
- +
-= Simple laser-cut case +
- +
-[[https://​github.com/​rad1o/​hardware/​tree/​master/​cases/​01_simple_lasercut|Here]] you can find a simple design for a laser-cut case. +
-You can use acrylic glass or even wood for this. It offers basic protection and some mounting for a lanyard or clip.  +
-Feel free to add custom engraving to find your rad1o again when giving it out of hand. +
-Parts needed: +
-  * 2pcs  10cm x 13cm acrylic glass/​wood/​.. +
-  * 4pcs  M3x28mm screw +
-  * 8pcs M3      screw nut +
-  * 8pcs M3      nylon screw nut (or any other isolating material - alternatively,​ isolating washers) +
- +
-{{:​cases:​simple_laser_cut_top.jpg?​200 |}} +
- +
-{{:​cases:​simple_laser_cut_bottom.jpg?​200 |}} +
case.1439362111.txt.gz · Last modified: 2015/08/12 08:48 by chris