This shows you the differences between two versions of the page.
Both sides previous revision Previous revision Next revision | Previous revision | ||
case [2015/07/21 10:12] chris added simple lasercutted case |
case [2015/08/19 14:47] (current) iggy |
||
---|---|---|---|
Line 1: | Line 1: | ||
- | = CAD Data for a rad1o case | + | see [[extension:lasercase|Laser Cut Enclosure]] |
- | + | ||
- | If you want to build your own case for the rad1o, we added DXF files to github. | + | |
- | + | ||
- | rad1o_dimension.dxf is just the PCB outline with holes. | + | |
- | + | ||
- | https://github.com/rad1o/hardware/blob/master/rad1o_dimension.dxf | + | |
- | + | ||
- | rad1o_with_parts.dxf is PCB, display, joystick and factory mounted connectors. | + | |
- | + | ||
- | https://github.com/rad1o/hardware/blob/master/rad1o_with_parts.dxf | + | |
- | + | ||
- | You can also easily make your own dxf files using Eagle, just activate your desired layers and run the dxf.ulp | + | |
- | + | ||
- | == Height of the case | + | |
- | + | ||
- | There were some questions about the height, normally there are no parts on the backside, only if you need JTAG connections or a few CPLD extension lines connects here. If you solder the SMA connectors, you need about 1,5 mm here. | + | |
- | + | ||
- | If you will place the battery on the back, you need about 5 mm here and some space for the cable on the left. On the front you need a minimum height of 5 mm for the audio connector and a hole for display and joystick. | + | |
- | + | ||
- | Hint: The pictures currently show the first prototype - the current Github contains the correct data for the camp edition. | + | |
- | + | ||
- | Happy building or knitting! | + | |
- | + | ||
- | = Simple lasercutted case | + | |
- | + | ||
- | [[https://github.com/rad1o/hardware/tree/master/cases/01_simple_lasercut|Here]] you can find a simple design for a lasercutted case. | + | |
- | You can use acrylic glass or even wood for this. It offers basic protection and some mounting for a lanyard or clip. | + | |
- | Feel free to add custom engraving to find your rad1o again when giving it out of hand. | + | |
- | Parts needed: | + | |
- | * 2pcs 10cm x 13cm acrylic glass/wood/.. | + | |
- | * 4pcs M3x28mm screw | + | |
- | * 8pcs M3 screw nut | + | |
- | * 8pcs M3 nylon screw nut (or any other isolating material - alternatively, isolating washers) | + | |
- | {{https://pbs.twimg.com/media/CKJW20YXAAABa37.jpg}} | + |