User Tools

Site Tools



This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
case [2015/07/13 19:42]
case [2015/08/19 14:47] (current)
Line 1: Line 1:
-== CAD Data for the rad1o +see [[extension:lasercase|Laser Cut Enclosure]]
- +
-If you want to build your own case for the rad1o, we added DXF files to github. +
- +
-rad1o_dimension.dxf is just the PCB outline with holes. +
- +
-https://​​rad1o/​hardware/​blob/​master/​rad1o_dimension.dxf +
- +
-rad1o_with_parts.dxf is PCB, display, joystick and factory mounted connectors. +
- +
-https://​​rad1o/​hardware/​blob/​master/​rad1o_with_parts.dxf +
- +
-You can also easily make your own dxf files using Eagle, just activate your desired layers and run the dxf.ulp +
- +
-There were some questions about the height, normally there are no parts on the backside, only if you need JTAG connections or a few CPLD extension lines connects here. If you solder the SMA connectors, you need about 1,5 mm here. If you will place the Battery on Backside, you need about 5 mm here and some space for the cable on the left side. +
-On the frontside you need a minimum height of 5mm for the Audio connector and a hole for display and joystick.  +
- +
-A hint, the picture currently ist only the first prototype, the current Github shows the right data for the camp edition. +
- +
-Happy building or knitting! +
case.1436809361.txt.gz · Last modified: 2015/07/13 19:42 by rfguy