User Tools

Site Tools


case

This is an old revision of the document!


CAD Data for the rad1o

If you want to build your own case for the rad1o, we added DXF files to github.

rad1o_dimension.dxf is just the PCB outline with holes.

https://github.com/rad1o/hardware/blob/master/rad1o_dimension.dxf

rad1o_with_parts.dxf is PCB, display, joystick and factory mounted connectors.

https://github.com/rad1o/hardware/blob/master/rad1o_with_parts.dxf

You can also easily make your own dxf files using Eagle, just activate your desired layers and run the dxf.ulp

There were some questions about the height, normally there are no parts on the backside, only if you need JTAG connections or a few CPLD extension lines connects here. If you solder the SMA connectors, you need about 1,5 mm here. On the frontside you need a minimum height of 5mm for the Audio connector and a hole for display and joystick.

Happy building or knitting!

case.1436775176.txt.gz · Last modified: 2015/07/13 10:12 by mkie